正文

Module 7 Exam - CCNA2007-05-15 19:57:00

【评论】 【打印】 【字体：大 中 小】 本文链接：http://blog.pfan.cn/ccna/25924.html

分享到：

Take Assessment - Module 7 Exam - CCNA 1 Networking Basics (Version 3.1)

 Time Remaining:

1
How does 1000BASE-T use the UTP wire pairs to accomplish transmission?
two pairs are used to transmit and two pairs are used to receive
one pair is used to transmit, one pair is used to receive, one pair is used for clocking, and one pair is used for error correction
all four pairs are used in parallel by both hosts to transmit and receive simultaneously
two pairs of wires are used as in 10BASE-T and 100BASE-TX

2
Which RJ-45 pins are used to transmit and receive data in an Ethernet 100BASE-TX Category 5 UTP cable? (Choose two.)
1 and 2
3 and 6
4 and 5
7 and 8

3
What is the maximum distance that 10BASE-T will transmit data before signal attenuation affects the data delivery?
100 meters
185 meters
300 meters
500 meters

4
To make sure timing limitations are not violated when implementing a 10 Mbps Ethernet network involving hubs or repeaters, a technician should adhere to which rule?
the 4-5-3 rule
the 6-4-2 rule
the 3-4-5 rule
the 5-4-3 rule

5
Which of the following are Fast Ethernet technologies? (Choose two.)
100BASE-5
100BASE2
1000BASE-F
100BASE-FX
100BASE-TX

6
At which OSI layer do the differences between standard Ethernet, Fast Ethernet and Gigabit Ethernet occur?
physical layer
data link layer
network layer
transport layer

7
Which statements describe Gigabit Ethernet technology? (Choose two.)
operates at 100 Mbps
typically used for backbone cabling
requires shielded twisted-pair cabling
can be implemented over copper and fiber
primarily used between workstations option

8
Which Ethernet standard does the IEEE 802.3 standard recommend for backbone installations?
10BASE-T
100BASE-T
100BASE-FX
1000BASE-LX

9
Which media types can be used in an implementation of a 10BASE-T network? (Choose three.)
Category 5 UTP
Category 5e UTP
Category 3 UTP
coaxial cable
multi-mode fiber
single mode fiber

10
Which of the following Ethernet technologies are considered legacy Ethernet? (Choose three.)
10BASE2
10BASE5
10BASE-T
100BASE-T
100BASE-FX
100BASE-TX

阅读(4192) | 评论(3)


版权声明：编程爱好者网站为此博客服务提供商，如本文牵涉到版权问题，编程爱好者网站不承担相关责任，如有版权问题请直接与本文作者联系解决。谢谢！

评论

loading...
您需要登录后才能评论，请 登录 或者 注册